Cart

Home S&P VENTILATION industrial applications DOUBLE INLET BACKWARD CURVED IMPELLER – BELT DRIVE DFM Series

DOUBLE INLET BACKWARD CURVED IMPELLER – BELT DRIVE DFM Series

Description

DFM-N

Double inlet centrifugal fans. Manufactured from steel sheet protected with cataforesis primer + epoxy paint finish. Designed to continuously circulate air from -20ºC up to 40ºC (60ºC with C3 bearings).

Assembly systems
• ARRANGEMENT 6: Impeller mounted on shaft running in bearings on each side of casing and supported by the fan casing.
ARRANGEMENT 18: Generally as arrangement 6 but with a fan and motor supported by common base frame.
• ARRANGEMENT 19: Generally as arrangement 6 but with the motor supported by the fan scroll.

Motors
2, 4 or 6 pole, IE 3* high efficiency (the rpm of each motor will be adapted according to the calculation for each drive), three-phase 230/400V 50Hz up to motor size 132 and 400/690V 50Hz for higher motors. IP55, Class F protection.
* From 0,75kW, motor can be IE 2 and controlled by VSD.

On request
• Manufactured from different materials.
• 2-speed motors.
• 60 Hz versions.
• Painted in different RAL colour.
• Inspection door, draining, weather seal on scroll and shaft access
• Thermal insulation lagging.

ATEX

Versiones ATEX
Bajo pedido, versiones antiexplosivas según la Directiva ATEX para modelos trifásicos:
Para trabajar a temperaturas de -20ºC a +60ºC, presión ambiente (absoluta) de 0,8 bar hasta 1,1 bar, según EN 14986.

• Gas:
3G IIB T2-T3-T4, Motor ExnA (sólo para categoría 3G)
3G IIB+H2 T2-T3-T4, Motor ExnA (sólo para categoría 3G)

Attributes

  • 61-DFM-N-TRbdp506

    Backward curved impeller

Reviews

There are no reviews yet.

Be the first to review “DOUBLE INLET BACKWARD CURVED IMPELLER – BELT DRIVE DFM Series”

Your email address will not be published. Required fields are marked *